Übermister

Übermister

This product comes standard with a 10-head mist maker and transformer (MM10).

There is a plug-and-play hygrostat (humidity controller) available, specifically designed to work with the Übermister, sold separately. For info: hygrostat. It has a sensor that detects and keeps a pre-set humidity level (user-selected). 

The Übermister should be placed outside of the growing area, only the fog should be fed into the tent. This will prevent the recycling of moist air, breaking the fan within a few months.

Do not attach "rippled" ducting to the Übermister as it will collect water but use a smooth PVC pipe instead.

Connect your tap water line directly to the machine’s water inlet valve. Remember to also connect an overflow pipe to the Übermister just to be safe. We are not responsible for any damage caused, the overflow pipe HAS TO BE connected! Only use reverse osmosis (R/O) or tap water. DO NOT add any additives to the water! Ever!

Clean the disks once a month with a tooth brush - a bit of a clean on the inside of the HM350 won't hurt either.

For optimal results, the recommended height of the water level should be max 10mm above the cut-off sensor. (The black thingy on top of the unit).

This unit comes ready to connect to power and a water supply and you can buy a humidity controller (optional) so that you can dial up your desired humidity level.

The unit is mobile so no expensive installation is required.

It's good to switch the unit off for an hour a day but if you set the hygrostat (optional) to 80% it'll stop automatically.

Specifications:

• Fog output: up to 6kg/hour.

• Air quantity: 120m³/hour.

• Maximum greenhouse size: 200m^3.

• Outlet size: 110mm.

• Maximum power consumption: 320w.

• Inlet water pipe: 1/2 inch.

• Dimensions: 470 x 240 x 330mm.

• Noise: less than 36db.

• Water particles: 10 microns.

Just connect the water supply, the overflow pipe and set your float valve so the water level is max 10mm above the sensor of the MM10. (5mm is better as it increases steam output by quite a bit)

Our experiment in 6L of water:

 Always keep the water level as close as possible to the sensor, don't have to much water above it!

• water level 30mm above cut-off sensor:  1.5L used in 60 minutes.

• water level 10mm above cut-off sensor:  5L used in 60 minutes.

• Adjust your float valve to the correct filling level!

FEATURES:

• Has an automatic water level control system.

• The Übermister will not launch if the water level is too low.  

• Replaceable ceramic discs reduce maintenance costs as they will age and put out less mist.

• Manual or automatic humidity control.

• Plastic 5.6 litre water tank.

• Power: 300w

• Capacity: 5.6 litres

• Dimensions: L x 400mm W x 340mm H x 310mm (comes without a pipe).

• Weight: 11kg.

Humidifiers are essential in a grow room because many indoor crops have an ideal range, being 40-50% during veg and flowering. For seeds and clones, this humidity range can be as high as 70-75%.

Diagrammatic representation and page 2

Specifications

User Guide

The Übermister in action

The Übermister with optional hygrostat

​

​

​